*40 character, 4 line *view angle 12h or 6h *stn gray, yellow or blue *led b/l available *extended temperature available *rohs compliant PC4004G-O (40x4) char acter lcd display absolute maximum ratings at t a = 25c item symbol min max unit power supply (logic) vdd -0.3 7.0 v power supply (lcd) vo -13.5 +0.3 v input voltage vi - 0.3 vdd +0.3 v operating temperature (standard) topr 0 50 c storage temperature (standard) tstg - 20 70 c extended operating temperature topr - 20 70 c extended storage temperature tstg - 30 80 c features interface pin connection no symbol function no symbol function 1 nc no connection 14 vss power supply (gnd) 2 nc no connection 15 db2 data bus line 2 3 e2 enable signal for chip (2) 16 vss power supply (gnd) 4 nc no connection 17 db3 data bus line 3 5 r/w instruction/register select 18 vss power supply (gnd) 6 nc no connection 19 db4 data bus line 4 7 rs read/write 20 k power supply for led backlight (-) 8 vss power supply (gnd) 21 db5 data bus line 5 9 e1 enable signal for chip (1) 22 vdd power supply (+5v) 10 vss power supply (gnd) 23 db6 data bus line 6 11 db0 data bus line 0 24 vdd power supply (+5v) 12 vss power supply (gnd) 25 db7 data bus line 7 13 db1 data bus line 1 26 a power supply for led backlight (+) mechanical specifications item overall size viewing area character size character pitch dot size specifications 288.3w x 77.5h x 14.0t 253.8w x 56.6h 5.00w x 8.476h 6.245w x 13.69h 0.96w x 1.168h led backlight specifications forward voltage forward current power dissipation 4.2v (typ) 2200ma (typ) 11000mw (typ) 570nm (typ) peak wavelength 05.28.08 rev 0 electrical characteristics at t a = 25c, vdd=5v+0.25v item symbol min typ max unit power supply (logic) vdd 4.5 5.0 5.5 v supply current (logic) idd 5.5 6.0 8.0 ma lcd driving voltage vdd -vo 8.5 9.0 9.5 v lcd supply current llcd - 0.3 0.7 v tel:(800)688-0613 tel:(719) 589 3122 fax:(719) 589 3592 www.p-tec.net sales@p-tec.net p-tec corp. 2405 commerce circle alamosa co. 81101
PC4004G-O (40x4) char acter lcd display all dimensions are in mm. tolerance is 0.3 unless otherwise specified lcd block diagram dot layout tel:(800)688-0613 tel:(719) 589 3122 fax:(719) 589 3592 www.p-tec.net sales@p-tec.net p-tec corp. 2405 commerce circle alamosa co. 81101 05.28.08 rev 0 288.30.5 2 6 7 . 4 280.2 253.8 v.a. 248.555 a.a. 77.5 69.6 56.6 v.a. 51.51 a.a. 4.95 3.95 2.54 p2.54 x 12= 2.54 8.84 17.30 30.48 26 - ?1.0 13.69 10.44 6.245 5.0 8.476 0.96 0.05 0.05 1.168 controller 1* controller 2 * backlight segment diver x 2 segment diver x 2 40x4 character lcd panel 160 seg 160 seg 16 com 16 com 40 seg 40 seg * s6a0069 or equivalent e1 r/w rs db0-db7 vdd vss vo e2 anode cathode
|